What to Know about Shiplap Siding

Shiplap provides a unique design on home. It may be used in any possible way that you prefer but mostly it is utilized as siding exterior of the home.

When this is the selected material to decorate the exterior of your home, it is important to know whether shiplap siding should be one of the more important material that will provide not only beautification of your home but also the comfort it will give like protection from the weather.

It will help you decide whether it will fit the purpose by being aware of the pros  and cons of the material. This being said, you can also check roofers wellington for more details and information about construction materials. 

Moving on, here are some of the pros and cons to guide you in choosing the right materials for your home.

Pro: Installation is Easy

A relatively easy task for the process of installing shiplap siding to the exterior walls of your home. It’s as easy as laying the boards to overlap. The upper edge will be thinner than the lower edge that’s why it is uncomplicated to identify that you have placed the board the correct way around. To seal the material, the shiplap siding boards are nailed into place prior to application of caulk around the borders.

Con: Process of Repairing Damage

It would be difficult to repair the damage as it will be necessary to remove the entire board to replace it with another. To prevent this drawback, make sure the boards are cut to the correct size before any work is engaged in will help.

Pro: Extra Coverings  

Shiplap can aid waterproofing methods that are required to install for exterior walls is another benefit that can be obtained from using the material for siding.

Pro: Merging With Other Materials

For a contemporary, urban aesthetic style, the flexibility of shiplap can be merged with other materials like concrete, brick, or marble.

Con: Maintenance Issue

Ongoing maintenance is one major issue with wood siding exteriors. To prevent this, application of paint for siding is a must every four to five years to preserve the material.

 

Guide to Installing a Tile Backsplash in the Bathroom

Installing a tile backsplash is a small DIY job that can greatly upgrade the aspect of your bathroom. Even a small backsplash will need some preparation, patience and at least three separate days to accomplish the work although the skills involved in laying backsplash tiles are easy to master.

Begin to Clean

To provide a good surface for the tile adhesive, clean off the wall. This could be as simple as dusting off the wall if there are no stains. Otherwise, scrub the stain using bathroom cleanser and a scrub brush, and with a clean rag, wipe it dry.

Line a Grid

On your work area use a pencil to draw a tiling grid. To help you in drawing a tiling grid, use tape measure and level. The width of your selected tile plus one of your tiling spacers for each column or row. Decide the location of the spacer for each column and row when you are drawing the grid.

Plot Your Grid

Into each intersection on your grid place thumb pins. After you apply the tile adhesive, this will help you keep the guidelines in mind.

Adhesive Application

Pick an area about 2 or 3 feet square. Using a tiling trowel, lay down a coating of tile adhesive. As you move on with your work, remove and replace the push pins. Opposite the adhesive, draw the toothed edge of the tiling trowel to cut channels on the surface after the tile adhesive is on the wall.

Set the Tiles

Using the push pins to guide your placement, lay a tile on the wall by pushing the tile into its place. To give it a good snap-up on the adhesive, slight twist the tile in proximity to the wall, and then twist it back into order and firmly press it.

Utilize Spacers

To help align further tiles, set spacers as needed. Once the next tile is in place, you can remove the spacers on the side of the tile, but to prevent the tiles from sliding down the adhesive, the spacer on the top and bottom should stay.

Repeat Steps

Until all of the tile in the backsplash has been laid, repeat steps 4 through 6. Best to let the adhesive dry overnight.

Grout Application

Remove all the push pins and spacers placed when the adhesive is dry. Follow the manufacturer’s direction when mixing the purchased grout. By pushing it into the spaces between the tiles with a grout float, apply the grout to the wall. Make the grout stand overnight.

Finishing Up

Underneath the backsplash, outlay a drop cloth. Mix a cleaning solution: one part water to one part white vinegar. Using the prepared solution plus sponge and scrubber, clean the grout residue off the tiles.

 

What you Need to Know About Entry Lighting

More than just a beam that gives the path to front door, placing an exterior lighting provides a finer look of a house. You can lighten up your home’s front area and highlight the front porch by distinctive planning and give enough budget.

Welcome or Entry Light

When passing by any residential areas, anyone catches the eye of the house that’s well lit and inviting design. Exterior entry lighting makes the most of what you’ve got once done correctly, enhancing your home’s design, expanding the security, and guiding guests directing their way to the front door.

It really ain’t easy to select the perfect fixture and truly a real challenge that needs to have a right solution. Just by looking at the lighting aisle sold either online or at your favorite lighting store, it would be overwhelming with the vast availability of finishes, styles, whistle, and bells.

Begin by assessing your opening to decide the type of fixture that best suits it, whether ceiling-mount, in very large entries or the usual wall-mount. Consider also a combination of the two types of fixtures. The overall essence of this project is to create a wide splash of light that will accentuate the main house entry, eliminate dark corners, and give off a warm glow that is delightful to the eyes.

Cost of Entry Light

Expect to pay a handful of budget or better to have an excess budget projection for a quality fixture that was manufactured from solid-cast or hand-wrought metals but still there’s an alternative for every budget.

It is a relatively no sweat job when changing a light fixture. For a new fixture, it may take more skill plus tools for installing a dedicated junction box. Had you are having a hard time to install, you can always seek for professional installation.

Most fixtures can be cleaned with a damp cloth but the unlacquered brass material needs polishing to keep it lustrous. It helps protect against oxidation by regularly applying a thin coat of wax to exposed metal parts.

For some lights made from solid copper, warranties last from 30 days to even a lifetime. On industry’s average, about one to two years.

How to Conceal Concrete Stairs

Concealing concrete stairs can give additional warmth to the area. It looks boring by just looking at the gray concrete stairs. There are so many possibilities when it comes to concealing or covering concrete stairs.

Consider the surrounding decor of the house as well as the time and costs of the project before choosing a process. You can opt for the less expensive options rather than cutting corners to save money on more expensive projects for those on a tight budget.

Here are the common materials to conceal concrete stairs:

Carpet Runners. To conceal concrete stairs, place the chosen carpet from top to bottom. For wooden stairs covering, narrow strips of carpet are placed down the center portion of the stairs, having bare areas on each side. Slit the carpet to fit edge to edge for a concrete type of stairs. This material could both be inexpensive to very expensive, depending on the cushioning and chosen to carpet.

Hardwood Flooring. Conceal concrete stairs with hardwood flooring for a rich modern or country look. The key to this project is before laying the hardwood strips, conceal the steps and rises with thin plywood. Depending on the hardwood chosen, this project can range from affordable to very expensive. For those working on a limited budget, wood laminate will undertake. During the process, the stairs are allowed to be used as the work can be done in stages.

Tile. Consider covering concrete stairs with tile for a retro or shabby chic look. To secure, use an epoxy-based glue and affix the tile to the concrete stairs. To create a mosaic look, use small colorful tiles or score bigger tiles to fit the area. For those who select a vinyl tile, this project can be completed within a relatively tight budget. The cost will go up strikingly if ceramic tile is desired. It depends on the type of tile selected with regards to the time involved. During the work process, the stairs can still be used.

Paint.  Painting is the basic solution to shabby concrete stairs. For covering concrete in one coat epoxy-based paints are available. From penetrating into the concrete, the clear sealant avert oil or latex paint. Before adding your favorite color to the stairs, use the sealant first and allow it to dry completely. For those looking to save money on concealing, this project is affordable. However, the stairs can’t be used during this project for the drying time needed. For a beginner, it can be labor-intensive and messy. Seek the help of professionals if you yourself cannot finish the project.

 

 

Repair or Replaced Water Damaged Carpet Flooring

There are tons of possibilities how your carpet flooring can be damaged. Either done by nature or plainly out of luck, your water-soaked flooring may have to be cleaned immediately, repaired, or even replaced as the last resort.

Lessen The Damage

Once carpet flooring is soaked in water, its best to eliminate as much water as you can, as fast as possible. Make air circulate inside your house and open the door and the windows to exchange moist indoor air for drier air if humidity outside is low. Utilize fans directing on the floor area to maintain that dry air circulating, and focus the fans on those areas where water may have soaked into the subfloor. Additional option to dry the floors faster is to try cranking up the furnace or radiant floor heating.

The wet/dry vacuum may not have all the ability to extract liquid concealed deep within the carpet and padding depending on how soaked your floor is. If that’s the situation, seeking the professional help is what you’ll need: to remove large amounts of water quickly in order to facilitate rapid drying, opting to rent a carpet cleaner, or hire a floor-care company. It would be a better option to have it professionally cleaned, sanitized, and deodorized to extend the life of your carpet.

As long as it is dried out quickly, carpet made from synthetic materials can stand a thorough soaking. For other materials, rot can be a serious problem like for a wool carpeting. There are signs that the water-damaged carpet may be fostering existence of mold or mildew so take a closer look at the carpet for any discoloration and odor. Occasionally, with new material that integrates well with the rest of the floor, a small section of damaged carpet can be replaced. In most cases though, there is a need to remove and replace the whole carpet flooring to completely eliminate the damage especially caused by nature.